Your Current Location:HomeNewsGuideline for option of ribbon mixer

Guideline for option of ribbon mixer

Author:adminPublished:2019-01-10

1.  Select suitable model according to output. For each batch, the materials mixing time is approximately
    15 minutes, with the materials feeding time, each batch processing is 20minutes. Users can calculate
     their capacity and choose the matched model. 

2. According to the work principle, the double spirals are in opposite direction push materials is same.
    The inner spiral with the pitch is less tha outer spiral belt, consider the ability to push material should 
    be same, so its width is bigger than outer spiral belts. This point should be noticed when choice the
    blender.

3. Usually  ribbon/spiral workhead to shell's distance is 4 mm to 10 mm. However some particle size
    materials' friction force is not the same, so the various components'mixture time are different and
    result in heterogeneity. Now some supplier have realized this point, they pay attention to the precision
    machining to reduce the distance below 3 mm; another way is to make the shaft between shell in
    the form of adjustable position. In choosing mixer, this form is the best option. 

4. Not on side discharging,notice the discharging ways&valve.Shortest time discharging can keep
    uniformity. If by side discharging, firstly it will waste time and reduce efficiency; secondly the materials
    have reached best mixture status, excessive mixing  will undermine uniformity, thus losing the
    meaning of mixing.

In a word, properly operate a good horizontal mixer will significantly improve users'production process.           

            

 

Phone: +86-21-60546980

Fax: +86-21-60917671

E-mail: info@konmixchina.com

Why choose us|Our clients|Links|Contact us

No.2601 Xietu Road,Xuhui District,Shanghai,China.PC:200030
Copyright © Konmix Corporation, All Rights Reserved. Powerd by:Yongsy